Every day there are logs of application for double sided tape. It’s widely used around us. However not many of us that can use it very successfully. It may look very simple to use. But it require your patience & correct steps.
As a professional Double Sided Tape Manufacturer, we deelpy understand the concers from end customers. So we always try to improve our products, and help them to have a good use experience.
We write this article to share with you how to use double sided tapes.
Ther are many types of double sided tapes ( you can check this article: Different Types Of Double Sided Tape ), including Tissue Tape & Foam Tape. Below steps that can work for all of them.
Step 1: Clean & Dry the Surface
This step is very important. Because it can affects the strength of the bond directly. A clean & dry surface will ensure a good performance. A cleaning fluid or alcohol can be used at this moment. Remove any dirt, dust, or debris to ensure that the tape sticks properly. Then we need to wait until it is completely dry.
Step 2: Confirm Desirm Desired Length & Cut The Tape in Advance
If you could cut the tape in a suitable size at the very beginning, that will help your work goes smoothly, and you don’t need to cut it at twice. Also it won’t lead to waste of tape. Some double sided tapes come in rolls and can be easily cut to size with scissors.
Step 3: Confirm the Position & Peel Off The Backing Paper
First, we need to confirm the position and then Place the Tape Onto the Back of the Object. Because as long as you stick the tape on the object, it’s hard to move and change the position again. If you got a wrong place for the tape, it will affect the bonding strength. So be careful & confirm the position first. Then Peel off the backing paper from one side of the tape. Make sure to only remove the backing paper from one side of the tape, as the other side will be used to stick to the other surface.
Step 4: Apply the Type to One Surface & Press Down
Apply the exposed adhesive side of the tape to one of the surfaces you want to bond. Press down firmly to ensure that the tape sticks properly. Be noted that you have to keep pressing for few seconds, that can help to make a great coincide.
Step 5: Peel Off the Remaining Backing Paper
Pell off the backing paper from the other side of the tape.
Step 6: Apply The Other Surface to The Tape
Apply the other surface to the exposed adhesive side of the tape. Press down firmly to ensure that the two surfaces are bonded together securely. Be noted: Please keep pressing for a few seconds.
Step 7: Repeat The Process As Needed
Repeat the process as needed to apply more tape, or to bond additional surfaces together.
Conclusion
Based on above 7 steps and you can see it’s very easy. As long as you keep enough patient & follow above steps, sure you can make it. Also if you have other better ways, welcome to share with us.
